簡介：測定當溫度在固定速率下上升時，高分子材料的力學性能。

簡單進行熱變形和維卡軟化點的測定，微處理器控制，與溫度控制器連接從而精確地控制和記錄油浴溫度。

測定當溫度在固定速率下上升時，高分子材料的力學性能。

內置測試結果打印機，RS232 輸出，WINDOWS 軟件操作。

維卡軟化點測試儀儀器特點：

2位、4位系統

* 自動冷卻系統，通過微處理器自動控制

* LCD顯示器自動提示檢測程序、較準及測試結果

* 鍵盤式輸入?yún)?shù)

* 纖維強度選擇范圍0.45-1.8-8MPa.也可選擇非標準纖維強度

* 樣品放置簡便，檢測位置升高簡便，并可手動降低

* 測試負載：維卡測試1&5kg,熱變形測試1-3119g

* 可對偏轉進行測量，傳感器精度為0.01mm

* RS232數據輸出端口

* 可選硬拷貝打印機及Windows軟件

* 符合任何國際標準

* 循環泵，確保硅油快速流動，溫度分布均勻

* 可實現溫度過高保護

* 可選氮?dú)猓ó?dāng)溫度超過250攝氏度時）

6位系統

* 內置硬拷貝打印機

* 通過Windows軟件可實現數據、文件的記錄

* 自校準程序

* 機動位置升降器

* 表格及圖解式檢測結果

* 自動冷卻系統 標準配置：

* 先進專業的微處理器控制

* 0-400 °C數字溫度測量、控制和顯示

* 獨特的適于高精確度溫度分布而設計的泵

* 內置冷卻系統

* 過熱安全保護

維卡軟化點測試儀符合標準： ISO 75,ISO 306,BS 2782:第一部分方法120A-E，BS 2782:第一部分方法121A&B,ASTM D5945,ASTM D5944,ASTM D1525。

Product Description
Ray-Ran’s Advanced 4 Station HDT/Vicat Apparatus has been designed to allow microprocessor control of the heat deflection & softening point testing for all polymer and plastic materials.

HDT – Heat deflection / distortion test, where a standard sized test specimen is subjected to a bending stress, whilst the temperature is raised at a uniform rate. The temperature at which the specified deflection occurs is measured and recorded. Testing is carried out in accordance with the ISO 75 (parts 1, 2 and 3) and ASTM D648 Test Standards.

Vicat (VST) – Softening point test, where a specified needle (indentor) penetrates a specifed distance into a sample with a specified load, whilst the temperature is raised at a uniform rate. The temperature at which the sample was penetrated is recorded at the Vicat Softening Temperature (VST). Testing is carried out in accordance with the ISO 306 and ASTM D1525 Test Standards.

The 4 Station Advanced HDT/Vicat apparatus allows testing of 4 samples at the same time, with an automatic cooling system, LCD display to provide automatic prompts for test procedures, calibration and results, HDT binary loads automatically calculated by microprocessor, over temperature protection, flatwise / edgewise sample testing, integrated calibration system. Tabular results presentation.

Standard features include
Digital temperature control, Temperature range to 300oC (temperature tests in excess of 250oC require the nitrogen blanket option), HDT Heads (1 per station), Vicat Nibs (1 per station), User selectable Fibre Stress 0.45, 1.8 or 8.00 MPa or a non standard fibre stress can be entered, User selectable Vicat penetration of 0.1mm or 1.00mm or a non standard penetration can be added, Temperature resolution +/- 0.1oC, User selectable temperature ramp rates of 50oC or 120oC per hour (non standard ramp rates can also be entered), Adjustable HDT span supports of 64mm or 100mm, Deflection / Penetration resolution +/- 0.01mm, Bath capacity 18 litres, RS 232 connection, RS232 Cable, Windows File Capture Software, Fully traceable certificate of calibration, Product user manual, CE mark of conformity, 1 year return to base warranty,

Optional accessories available
Binary HDT Test Weights (1 set required per station), 1.00Kg Vicat Test Weights (1 set required per station), 5.00Kg Vicat Test Weights (1 set required per station), Light Weight Load rods to test to .45 MPa, Heat Transfer Medium (Silicone oil Dow Corning 350cSt), Nitrogen Blanket, Air to Nitrogen Extractor,Thermal Printer (for 2 & 4 Station), Thermal Printer Paper (for 2 & 4 Station), Water Chiller unit.

Test Description
HDT – Determines the temperature at which a test sample subjected to a predetermined bending stress, deflects to a set distance.

Vicat determines the temperature at which an indenter penetrates into the test sample when a given load is applied

Part Numbers
RR/HDV2 2 STATION Advanced HDT/Vicat Apparatus RR/HDV4 4 STATION Advanced HDT/Vicat Apparatus RR/HDV6 6 STATION Advanced HDT/Vicat Apparatus

Complies with Standard(s)
ISO 75-3, ISO 75-2, ISO 75-1, ISO 306, BS 2782: Part 1: Method 121A & B, BS 2782: Part 1: Method 120 A to E, ASTM D5945, ASTM D5944, ASTM D1525