The BA Series are piezoelectric bimorph actuators poled in the parallel configuration. An insulated resin coating is applied to the external surfaces to protect the actuator and to eliminate electrical faults. The actuators can be wired in a three-wire or two-wire configuration as illustrated below.
壓電雙晶片驅動器，采用平行結構。外表涂覆絕緣樹脂涂層以保護致動器和消除電氣故障。可用雙線或三線連接。
三線連接要求電壓：+200V
雙線連接要求電壓：±100V, 偏轉和力度將減少30%
安裝方式：可用軟夾子，或者膠粘劑粘合在基座
可搭配驅動器：PDu100B, PDu100, PDm200B
雙線連接：PDu100B， ±50V, 一般用途，
雙線連接：PDu100， ±50V， 微型
雙/三線連接：PDm200B，+200V or ±50V，高效
| Order Code | Deflection | Force | Dimensions | Thickness | Free Length | Voltage | AC Voltage | Cap. | Stiffness | Res. Freq. | Mass | ||
| BA3502 | 0.6 mm | 0.07 N | 35×2.1 mm | 0.6 mm | 28 mm | 0-150V | +/-37 V | 18nF | 233 N/m | 230Hz | 0.23 g | ||
| BA4902 | 1.3 mm | 0.1 N | 49×2.1 mm | 0.75 mm | 38 mm | 0-200 V | +/-50 V | 20nF | 154 N/m | 140Hz | 0.41 g | ||
| BA6020 | 2.6 mm | 0.5 N | 60×20 mm | 0.8 mm | 53 mm | 0-150 V | +/-37 V | 320nF | 380 N/m | 60Hz | 5 g |
